November 20, 2017, 06:58:11 pm
Welcome, Guest. Please login or register.
Did you miss your activation email
News: Your new home for car and truck enthusiast to share, learn, and brag.

RamCharger.net



Show Posts

* Messages | Topics | Attachments

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - crazzywolfie

Pages: [1] 2 3 ... 68
1
Projects / Re: 91 RAMM'D 150
« on: November 05, 2017, 07:52:46 pm »
they are becoming more affordable since they have been around for a while. plus it would make it more fuel efficient. i know sometimes people look at the short term but in the long term you may get the money back in fuel saved. plus it would make it more daily drive able if you wanted something like that.

2
Projects / Re: crazzywolfie's 93 RC
« on: November 05, 2017, 07:28:12 am »
that is part of the problem. i don't know anyone who has a 92-93 truck that i could even borrow a pcm from. there is none left at the junk yards either. they rust out and are crushed.

3
Projects / Re: 91 RAMM'D 150
« on: November 05, 2017, 07:23:16 am »
but with how nice carter was looking i would have probably been looking into a different swap than a normal 360. what about possibly swapping in a new hemi or something cooler?

4
Projects / Re: crazzywolfie's 93 RC
« on: November 03, 2017, 11:00:01 pm »
well i have been avoiding this thing like the plag lately. been fighting with it so much this year that i just don't know what to do with it. i think i might have been having the pcm on it fail but really no way to test it. i have just been driving my 81 and elcamino instead. sitting on the fence about  replacing the pcm just so i will have a winter beater if it is the issue. i tried swapping out the crank position sensor and think i received a dud. ran crappier with the new sensor than with the old one. i also got a crap load of welding left that i should do to it but no point welding it up if i can't keep it running. got to love dilemmas like this. where do you call it quits?

5
Projects / Re: 91 RAMM'D 150
« on: November 03, 2017, 10:45:55 pm »
the bumper looks good. almost going to have to do something like that for my 89 eventually. the list of work that i need to do seems to be getting longer especially with the addition of a 4th vehicle.

whats the 360 for? don't all your vehicles have good engines in them?

6
General Discussion / Re: Random pictures
« on: November 03, 2017, 10:34:39 pm »
definitely looks like a weird vehicle. there is a pretty cool looking 70's dodge camper i see around town in the summer but i have never thought to take a picture of it.

i don't know how people drive small vehicles. as cool as the elcamino is it is almost too tiny compared to what i am use to. you put 2 kids in the front seat beside you and the cab is full. it also pretty short even compared to my truck.

7
General Discussion / Re: Random pictures
« on: July 13, 2017, 08:32:15 pm »
thanks. i already tried signing up for that website but it almost looks like the website is run but the idiots that run dodge talk and are super paranoid that someone will steal your identity and spam the forum lol. i couldn't even get the user name i use accross all the forums i am on for some reason.

as far as the el camino goes it is actually in pretty good shape.  it looks like it has had a frame off restoration at some point and is still in pretty good condition for the most part

8
General Discussion / Re: Random pictures
« on: July 13, 2017, 08:55:44 am »
look what followed me home lol. i know it is not a dodge but i think i like it. needs some electrical work but i think i am up to getting it done. anyone know of any good chevy/el camino forums to help me out if needed?

9
Vehicle Help / Re: Frame to axle brake hoses
« on: May 20, 2017, 10:51:13 pm »
rear flex lines work up front especially if you are installing quite a bit of lift. we installed one on my buddies 91. he installed at least 5" or 6" of lift and the rear flex line was more than long enough to reach where the stock one was stretched to the max.

10
Projects / Re: 1935 Dodge KC Truck
« on: May 14, 2017, 11:57:43 am »
ya i get that. i am just literally out of space. if i bring anything else home i will have to start parking on the lawn or down the street. my 93 has been permanently parked on the street for the last couple month lol. i am glad i got good neighbors who don'tr really care that much.

11
Projects / Re: 1935 Dodge KC Truck
« on: May 14, 2017, 08:03:00 am »
that's a pretty cool looking truck. i would love to get my hands on something like that one day but i am currently out of space and got too many projects on the go to take on anymore.

12
Projects / Re: crazzywolfie's 89RC
« on: April 23, 2017, 09:10:18 am »
ya if i go through all that work i will likely clear coat it. i think that way i can use cheaper paint but still get the same look. i guess we will see. i got to talk to my dad about it since he has lots of experience with this area of expertise.

ya i found that article also. other than that and another and a few bits here and there there was not much other than just lots of these horns for sale. i also found this PDF on the internet with some good info.
http://www.thecj2apage.com/storage/1950_Autolite_Service_Manual/horn-circuit.pdf

13
Cars and Trucks for Sale / Re: CL find
« on: April 22, 2017, 07:58:10 pm »
considering the shape it is in it is hard to say if it is a good or bad deal. trying to find a clean older vehicle gets harder and harder every year with more stuff getting crushed/scrapped or parted out. something like that in that shape might actually sell for that much around here. definitely has a cool factor going on.

14
Projects / Re: crazzywolfie's 89RC
« on: April 22, 2017, 07:30:31 pm »
well i am not going to go that all out on it. i was thinking about trying to spray it myself first and see how it comes out. someone did offer me a paint booth to use but we will see

i think i might remember seeing you post a picture or mentioning it but don't remember. sometimes horns are not too hard too fix on your own. just have to determine what the issue is. if they are horns like what i have it might just need the points cleaned or just be adjusted so that there is a gap between the points when the electromagnet starts pulling the metal plate. if the horn is old enough or more like an ooga horn it could possibly have a weak or bad motor. i had to replace the motor in my ooga horn when i got it to make it work reliably. i think it might have had a bad winding in it or something because it would work on and off.

15
Projects / Re: crazzywolfie's 89RC
« on: April 22, 2017, 05:22:28 pm »
ya your truck is part of the reason i wanted to paint it like this. i figure since i plan on keeping this forever and using it as a summer toy only minus well go all out on it and choose a cool paint job. i was originally thinking about keeping it the metalic blue that was on the 1 side but figure it would be pretty plain and no character if i did. at least the Macho wagon look would look good. it would also make the vehicle draw in attention everywhere it goes.

some of the horns still need some tuning/repair but this is about what i got done now. i even had my dads 1 horn over for testing/tuning. i am definitely starting to understand these horns pretty good. no expert but ahead of most. there is almost no info at all on the web for them other than people just selling them.
here is a video of them.
https://www.youtube.com/watch?v=U6vrgDGfe_c

Pages: [1] 2 3 ... 68
SMF 2.0.11 | SMF © 2015, Simple Machines
Page created in 0.105 seconds with 12 queries.