News:

Your new home for car and truck enthusiast to share, learn, and brag.

Main Menu

A518 torque converters

Started by The War Wagon, May 24, 2014, 06:54:25 AM

Previous topic - Next topic

The War Wagon

Anyone got any recommendations for beefing up A518 internals, starting with the torque converter?  Trying to make sure all the power I plan on building into my '92 in the future, actually GETS to the wheels!
Restoring/building a War Wagon - good advice ALWAYS welcome!

minionsram

Ive mainly stuck with the upgraded ATSM converter but I know a few fellers that swear by the TCI or Hughes converters. They are a bit too pricey for my blood though. For those you looking at 250 to 500
!985 W350. 360, 727, 241 44hd front and 60 rear
1990 w150 RC 360 518 2 inches of lift
83, 90, 89, 86 RC's in yard for parts
2001 Ram 5 speed regular cab short box project.
96 Jeep Cherokee (wifes)

SixGun

Transgo makes some real good shift lits also. Even for the A518.
"You may all go to Hell and I will go to Texas" - Davy Crocket

The War Wagon

I've got a B&M Transpak for it, but Dave didn't install it.  With then transmission fluid almost burned, and some rust on the cable, he opted for cleaning it thoroughly, adding the deep dish pan, and adjusting the bands.  He said, that IF the torque converter is going south, the Transpak would only burn it up faster.  He thought ti better to clean it up and run it a bit this summer, and then this winter, revisit it; see if the torque converter IS burning, and go from there.
Restoring/building a War Wagon - good advice ALWAYS welcome!

SixGun

I ran a B&M shift kit in a 72 Camaro years ago and it burned up my tranny.  I swore that would be the last B&M product I would ever buy.  There are some inherent problems with different models that the Transgo kits fix. This will be be my fourth TG kit. I like em. Just my .02
"You may all go to Hell and I will go to Texas" - Davy Crocket

The War Wagon

#5
Quote from: SixGun on May 26, 2014, 09:32:06 AM
I ran a B&M shift kit in a 72 Camaro years ago and it burned up my tranny.  I swore that would be the last B&M product I would ever buy.  There are some inherent problems with different models that the Transgo kits fix. This will be be my fourth TG kit. I like em. Just my .02


OK - I'll look into them!  :thumbsup:




Having looked into them via Summit, is THIS what I want?


http://www.summitracing.com/parts/trg-tf-3/overview/


Or is their something different, for offroad/crawling performance?
Restoring/building a War Wagon - good advice ALWAYS welcome!

SixGun

The link you showed is for a full manual stick shift valve body.  May want to consider TF-2 to keep it an automatic. 

Here's an allpar link that goes into some details on Torqueflite shift kits.  Its down a ways on the page. http://www.allpar.com/mopar/transmissions/torqueflite-tom-hand.html

May want to give them a call about your particular tranny.  I know there are hydraulic vs electronic 518's. Here's their site with phone number to their tech line.  http://www.transgo.com/products.php?cat=A500%2C-A518%2C-A618%2C-32-47-RH_RE&homeinclude=catalog&category_id=61&parent_id=61
"You may all go to Hell and I will go to Texas" - Davy Crocket

The War Wagon

Quote from: SixGun on May 26, 2014, 03:38:05 PM
The link you showed is for a full manual stick shift valve body.  May want to consider TF-2 to keep it an automatic. 



TransGo only shows ONE (1) A518 kit, and that is it!   :dontknow:


QuoteHere's an allpar link that goes into some details on Torqueflite shift kits.  Its down a ways on the page. http://www.allpar.com/mopar/transmissions/torqueflite-tom-hand.html

May want to give them a call about your particular tranny.  I know there are hydraulic vs electronic 518's. Here's their site with phone number to their tech line.  http://www.transgo.com/products.php?cat=A500%2C-A518%2C-A618%2C-32-47-RH_RE&homeinclude=catalog&category_id=61&parent_id=61


I'll look into that - I don't think mine is the electronic version, because the OD lockout is the pushbutton on the dash.  I shall investigate further...
Restoring/building a War Wagon - good advice ALWAYS welcome!

SixGun

#8
I think this is the one you are looking for.  To be sure, I would give them a call and tell them what you are look for.

http://m.summitracing.com//parts/trg-tfod-hd2

Better description on this link.

http://www.edgeracingconverters.com/index.php?main_page=product_info&cPath=33_36_49&products_id=89
"You may all go to Hell and I will go to Texas" - Davy Crocket

rjtx667

Martin Saine Built my tranny and converter for the 2000, I believe he will work on the 46-rh as well. The 2000 has a 46-RE so the difference is its electronic governor vs hydraulic.

He can sell you a whole new tranny or just the converter, I can't recall price on the converter but its good and so is the tranny.
1935 Dodge KC Truck
1991 &1993 RamCharger
2000 RamCharger
2005 Cummins