RamCharger.net

   I can't wait to see the burnout video.   

My nephew is in the National Guard and they show him some links to some funny stuff on YouTube.  This one is called Action Figure Therapy.  There 's a bunch but a handful are real funny.  Enjoy.

http://www.youtube.com/watch?v=VIylwth99Wg

http://www.youtube.com/watch?v=Qr41zoms_6o&feature=relmfu

http://www.youtube.com/watch?v=OS2yuSIcN74&feature=relmfu

http://www.youtube.com/watch?v=PiWkhET56uA&feature=relmfu

http://www.youtube.com/watch?v=ANXzG3aa9xQ&feature=relmfu

That naked girl knocked the f^ck out of that Hyundai.   

Quote from: Dodgestrike on September 07, 2012, 04:39:21 PM
I wish I had that part stack , I only have a small box and I need a transmision... I love that steering wheel btw

Thanks Buddy!!  Lots of good memories stacked there.   

 

James @ Brutal OffRoad gave me a recommendation for the short block work.  It will need some mill work done with the rust that accumulated over the years sitting.  Valve job will be in order to get it ready for lower octane unleaded gas.  The ball is rolling though.   

   One hot mutha in Corpus Christi. 

Here's a few pics of what I found. 

 

My numbers look low compared to everyone else.

Tracing route to ramcharger.net [50.115.6.130]
over a maximum of 30 hops:

  1    <1 ms    <1 ms    <1 ms  192.168.1.1
  2     7 ms    15 ms     6 ms  10.77.30.1
  3     9 ms     6 ms     8 ms  tge7-1.snantx6500-er01.texas.rr.com [24.28.134.1
06]
  4    23 ms    14 ms    15 ms  24.175.33.248
  5    16 ms    15 ms    15 ms  ae23.dllatxl3-cr01.texas.rr.com [24.175.32.146]

  6    15 ms    15 ms    23 ms  107.14.17.136
  7    17 ms    16 ms    18 ms  ae-0-0.ar0.dfw10.tbone.rr.com [66.109.9.105]
  8    52 ms    36 ms    35 ms  xe-11-1-2.edge9.Dallas1.Level3.net [4.59.32.25]

  9    37 ms    38 ms    41 ms  ae-4-90.edge2.Dallas1.Level3.net [4.69.145.203]

10    37 ms    36 ms    35 ms  COLOCATEUSA.edge2.Dallas1.Level3.net [4.71.220.1
54]
11    36 ms    37 ms    36 ms  core1.colocateusa.net [50.115.15.206]
12    35 ms    37 ms    37 ms  130.6.115.50.in-addr.arpa [50.115.6.130]

Trace complete.

What's the gear ratio on there now?

oops... hit quote instead of modify. 

Quote from: crazzywolfie on September 03, 2012, 03:32:37 AM
that heater box looks like it could be repaired with not too much work. a little bit of sheet metal and the thing will be as good as new unless you can find a new one.

Actually, the box had some tin like you would buy at the hardware store kinda fabbed to cover the hole but it was ugly.  Would rather just replace it if the opportunity presents itself.  Danger Dave has a couple of 70's era RC's that he was gonna scrap.  Said I could get one out of either but with the hours he puts in, he's a hard man to get ahold of.  We'll meet up sometime here in the near future I'm sure.  I think Dave is making up for lost time right now with the hours he puts in.

I'm in Corpus Christi, TX right now and going through the storage sheds.  Have a lot to load up.  Haven't heard from Sam yet sorry to say.  One disappointment is that the tranny I was counting on is not here.  Oh well,  There is a complete 727 from a 73 Cuda with a 440 that would need a rebuild that I might be able to trade or sell to help towards the build.  The 383 is here with everything just about from what I can tell.  Infested with giant-ass cockroaches that we spent the morning today killing. LOL  They were crawling out of the boxes, pistons and cylinder heads ....YUCK!  Looks like more surface rust than I counted on so a hot tank is in order.  Will need a carb, alternator, fuel pump, oil pump and water pump. All those were used on a 400 build that I lost in a divorce years ago.  Got lucky and found a distributer but not sure if it's from a B or RB motor yet.  I think both will fit if memory serves me but it will be taller.   I did find a 3 core radiator from a B body that I might be able to use with some repair.  I have a water pump housing from a 440 block.  Are those interchangeable with the 383 ?? Anyone know for sure.  Took some pics of the cache but won't be able to post till I get back home in a couple of days.  Didn't have the oil pan but I ordered a truck one already with the pickup tube and dipstick. Couple of neat items found: 73 Cuda AT long console, 68 383 pie pan air cleaner, 71 Plymouth GTX steering wheel, and 73 Camaro round tail lights. Hmmm.... trade items.   

Well got a visit from the axle fairy this weekend.  Set of 92 axles from Ryan (rjtx) came in on the workgoats express.  Ron brought them in along with some seats from Ryan as well.  Big thanks to Ron and Ryan. 

Gonna take the baton from Ron and run some fenders and a hood down to Sam in Corpus Christi.  Ron and I had a good visit and even had some play time in the local pick-n-pull to get him some springs for his Willy's project.  I'll let him tell you about that though.  Ron looked like a kid in a candy store with all those Jeeps and trucks out there.  LOL 

I was trying to figure out what this one piece was for and where it goes.  I've included 2 pics of it.  I don't see it in the FSM.  It was in the back of the truck with the gas tank so I was thinking it protected the filler hose or something.  Whoever can tell me and show me where it goes gets some karma, if we have that here.  I can't find any fuel line in 1/2" ID.  I even checked a couple of tractor supply places.  Will heater hose hold up for a vent line from the tank to the filler tube?   

I mentioned that broken heater box before and here's the pic.

Post a pic of your inspiration Ron. 

For me, Dirty Mary Crazy Larry and the General Lee got me loving the 69 Dodge Chargers.

http://www.streetlegaltv.com/news/the-mysterious-fate-of-the-dirty-mary-crazy-larry-69-charger-rt/

http://en.wikipedia.org/wiki/General_Lee_(car)

Damn, I bought one at the JY with brand new hoses for $25.  Of course, I had to pull it myself though.

Hola Will,