1978 Ramcharger Aka The "Death Charger"

[ProjectM880]

got your RC running better....found a huge vacuum leak at the brake booster (rotten vacuum caps).....got that fixed....set ignition timing.....but now i is out of gas .... What should I do

Awesome , i figure something was up since it ran so good a while back then it started running crappy.

Gas? Wait you assured me that it would run off hope's and Dreams, And as back up for more horse power run it off Orphan Tears and Unicorn Farts!

[rjtx667]

if thats the case... you don't get to lead anymore... I am not taking any part of smelling that exhaust 

[SixGun]

Did you need the transfer skid plate or grille before the Oct outing?  If so, I can run them out to Noah's place. Figure you might need some time to remove the pink if you do.

[ProjectM880]

Did you need the transfer skid plate or grille before the Oct outing?  If so, I can run them out to Noah's place. Figure you might need some time to remove the pink if you do.

Nope we can meet up when ever. Unless your looking for another excuse to go up to Noah's Shop 

[SixGun]

Was it that obvious?   

[ProjectM880]

Was it that obvious?   

I won;t be back there till next week, But I'm sure Noah wont mind if you swing by 

[workgoats]

By the way, the skid plate should bolt into existing holes in the frame and cross member if they are not modified.  Frame it was built on was an 82.

[ProjectM880]

By the way, the skid plate should bolt into existing holes in the frame and cross member if they are not modified.  Frame it was built on was an 82.

Good Deal Ron  I know we will put it to good use!

[workgoats]

It will need a handful of 7/16 bolts and nuts.

[ProjectM880]

It will need a handful of 7/16 bolts and nuts.

Not a problem, I'm sure we can wrangle up some 

[taz_man440]

It will need a handful of 7/16 bolts and nuts.

or a handfull of zip ties..

[SixGun]

Matching pink zip ties 

[ProjectPW]

Finally got the carburetor sorted out today. I had to do a minor overhaul on it to get the passages clear of the ethanol/water sludge. Also got the thermostat housing squared away and timing set..... about out of gas again 

[SixGun]

Brrrrtt....oops par-done did someone ask for gas?    

[ProjectM880]

Finally got the carburetor sorted out today. I had to do a minor overhaul on it to get the passages clear of the ethanol/water sludge. Also got the thermostat housing squared away and timing set..... about out of gas again 

Good deal, Wait did you order a thermostat housing or did the one I order come in?

We may have a extra thermostat housing if that's the case........

I will bring gas cans on Wednesday...... and My trailer that I should of brought you two weeks ago.